|
|
Post by BDuke on Dec 10, 2003 4:33:21 GMT -5
Hi everyone! Just ran across your forum, and could use some advise from your members. Our local track just went IMCA Stockcar last year. In the past we have been able to run open motors in our superstock class. Do you have any suggestions for a cam to run with the little holley carb. I see that this is stock car discussion, but hope that IMCA is in your vocabulary. Thanks
|
|
|
|
Post by Brian Wise on Dec 11, 2003 20:45:44 GMT -5
I assume the carb. you are talking about is the 350cfm. Holley. The carb of choice is the "Dorton" series.(87087 I beleive). Maybe some other members or visitors can help more on this one. My suggestion would be to talk to an engine builder who builds for your local guys that run the 350. The other option is to contact a manufacturer you trust, or have run in the past. They usually have good tech advise, and you can give them the "specs" you are building your motor to. (size, stroke, compression, ect.) I would also welcome others to give there input as well!!
Thanks for the post, HB
|
|
